MA1200 90x90cm Grow Tent Kit

The MA1200 90x90x180cm grow tent kit combines a 90 × 90 × 180cm enclosure, MA1200 light and the extraction equipment listed below. This compact square format gives you a defined place to arrange containers, lighting and airflow. Compare the grow tent kits range if you need a different light or footprint.

MA1200 90x90x180cm grow tent kit: space and equipment

The enclosure measures 90cm across each side and 180cm high. Allow additional room outside it for opening the door, routing ducting and reaching the electrical supply. The MA1200 is the included light; its 120W rating describes the fixture, not the total consumption of the fan and other connected equipment. Choose your growing area according to the plants and their light needs, rather than assuming that the whole floor receives the same intensity.

Component	Specification	Key Feature
Grow Tent	90x90x180cm Grow Tent	Check hanging loads before installation
LED Grow Light	MA1200 120W Quantum Board Grow Light	Full-spectrum LED grow light
Ventilation System	4″ Inline Fan + Carbon Filter+Digital Temperature Humidity Hygrometer	Extraction and environmental monitoring
Plant Support	60x60cm Trellis Net + 2 Bags	Canopy support
Installation Kit	Ducting Clamps + Hanging Ropes	Secure ducting and suspension

Why Choose Our Grow Tent Kit?

✅ Extraction and monitoring
The component list specifies a 4-inch fan, filter and ducting, plus a digital temperature and humidity meter. Extraction moves air through the enclosure; it does not replace an air conditioner or guarantee a particular temperature.

✅ MA1200 LED grow light
Position the light using its instructions and check plant response before increasing intensity. Keep adequate clearance between the fixture and canopy. No fixed yield or electricity-saving percentage is assumed.

✅ Plan the usable height
The 180cm enclosure height must accommodate containers, the growing canopy, light suspension and clearance. Plan these together before placing taller crops inside.

✅ Assemble and test
The listed support accessories help organise the growing area. Assemble the enclosure, install the equipment and test the complete setup before adding plants.

what‘s in the box?

• 1x 90*90*180 cm Grow Tent 
• 1 x 120W LED Grow Light
• 1x 4 Inch Fan
• 1x 4 Inch Pipe
• 1x 4 Inch Filter
• 3x 4 Inch Air Ducting Hose Clamp
• 1x Hanging Rope
• 1x 60*60cm Plant Pressing Net for Grow Tent
• 2 x Planting Bags
• 1 x  Digital Temperature Humidity Hygrometer

FAQ

Q: What does the MA1200 90x90x180cm grow tent kit include?
A: Yes! The kit contains a 90x90x180cm grow tent, 120W quantum board LED grow light, ventilation system and the listed support accessories. Seeds, plants, growing medium and nutrients are separate requirements. Check timer and control needs for your chosen routine.

Q: Can I grow vegetables like tomatoes in this tent?
A: Select crops whose mature height and canopy fit the available space. Tomatoes and other tall plants need room for containers, support and light clearance; the enclosure size does not establish a guaranteed plant count.

Q: How do I assemble the MA1200 90x90x180cm grow tent kit?
A: Allow time to check all components, assemble the frame and arrange cables and ducting. Installation time depends on your room and experience; test the light, extraction and controls before planting.

Q: Do you ship to all South African regions?
A: Enter your delivery address at checkout to view available delivery options and charges before paying. Contact us if the address or delivery requirement needs clarification.

Planning your MA1200 90x90x180cm grow tent kit

Place containers before fixing the trellis position, and leave access for watering and inspection. Keep ducting as direct as your room allows, avoiding crushed sections and unnecessary bends. Check that the inlet and outlet remain unobstructed after closing the tent. The supplied 60 × 60cm net is smaller than the enclosure footprint; plan the supported canopy around its actual dimensions.

For the MA1200 90x90x180cm grow tent kit, calculate lighting energy as 0.12kW × the hours used, then add the fan and other devices separately. Multiply measured daily kWh by your own electricity tariff. Dimmer settings and operating hours affect the result. See Eskom tariff information for background, and use the tariff on your own bill for the calculation.

Before ordering this MA1200 90x90x180cm grow tent kit, compare the included equipment with anything you already own. A different lighting choice may suit a different canopy or growing stage, but changing wattage also changes the heat and electrical load you must manage. Ask us to check the component list if you need a different connection size or an additional controller.

Six installation checks for your MA1200 90x90x180cm grow tent kit

1. Measure the route into the room. The 90 × 90 × 180cm enclosure needs working space around it as well as its stated footprint. Check the doorway, ceiling and space where the open door will sit. Leave access to the back of the growing area for inspection rather than filling every available centimetre with containers.
2. Lay out the containers. Their height reduces the space available for plants and light clearance. Plan where water will be carried, where runoff will be collected and how you will reach each container. The appropriate number depends on mature canopy size and growing method, not just how many pots fit on the floor.
3. Check suspension. Read the instructions for the frame, light and hanging hardware before loading them. Consider the combined equipment weight and how it is distributed. Position the light so that you can adjust it without pulling on power cables or disturbing the extraction equipment.
4. Plan the air path. Check fan, filter and duct connections together. Leave the intake unobstructed and avoid crushed duct sections. Extraction depends on the surrounding room air; monitor both the room and the enclosure after switching the light on. A warmer room may require changes beyond increasing fan speed.
5. Calculate electrical use. At its rated 120W draw, the light alone uses 0.12kWh per hour. Actual use depends on settings and operating hours. Add extraction and any separate controls to the calculation. Check electrical ratings before connecting equipment and keep plugs and connections away from watering areas.
6. Run a trial before planting. Switch on the equipment, confirm the intended schedule and check for obstructions, loose fittings or water risks. Record temperature and humidity with the lights running. This gives you a practical baseline for the MA1200 90x90x180cm grow tent kit before a growing canopy changes moisture and airflow conditions.